Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_EL9QHKG10GPM20IJGE61AK10S6
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_EL9QHKG10GPM20IJGE61AK10S5
Home
>
Motors
>
HVAC
>
Condenser Fan
Vertical Shaft Up or Shaft Down Weep hole in each end shield Rheem mounting holes w/screws installed Water slinger on shaft Double full flatted shaft Thermally Protected Extended Studs/Belly Band/Mounting Holes
Vertical Shaft Up or Shaft Down Weep hole in each end shield Rheem mounting holes w/screws installed Water slinger on shaft Double full flatted shaft Thermally Protected Extended Studs/Belly Band/Mounting Holes
Replicates OEM Wiring Vertical Shaft Up or Shaft Down Weep hole in each end shield Rheem mounting holes w/screws installed Water slinger on shaft Double full flatted shaft Thermally Protected Extended Studs/Belly Band/Mounting Holes
Replicates OEM Wiring Vertical Shaft Up or Shaft Down Weep hole in each end shield Rheem mounting holes w/screws installed Water slinger on shaft Double full flatted shaft Thermally Protected Extended Studs/Belly Band/Mounting Holes
Condenser Fan Motor Permanent Split Capacitor (PSC), Capacitor required 27" Leads 1/2" Diameter Shaft with Double Flat Extended Studs Shaft End and Lead End, Belly Band
Condenser Fan Motor Permanent Split Capacitor (PSC), Capacitor required 27" Leads 1/2" Diameter Shaft with Double Flat Extended Studs Shaft End and Lead End, Belly Band
Condenser Fan Motor Permanent Split Capacitor (PSC), Capacitor required 27" Leads 1/2" Diameter Shaft with Double Flat Extended Studs Shaft End and Lead End, Belly Band
Condenser Fan Motor Permanent Split Capacitor (PSC), Capacitor required 27" Leads 1/2" Diameter Shaft with Double Flat Extended Studs Shaft End and Lead End, Belly Band
Condenser Fan Motor Permanent Split Capacitor (PSC), Capacitor required 27" Leads 1/2" Diameter Shaft with Double Flat Extended Studs Shaft End and Lead End, Belly Band
Thermally Protected Open Enclosed Class B Insulation Ball Bearing 5/8" Diameter Shaft 30" Leads Extended Studs/Belly Band
Weather resistant reversing plug 2-1/4" resilient ring mounting 2-1/2" adapter rings supplied Automatic reset thermal protection Ball bearings Ambient temperature up to 70°C
Automatic reset thermal protection Double-shielded ball bearings Vertical/Horizontal Mounting
Enclosure
FLA
HP (Max.)
Hz
Motor Type
Multi-Rated HP
NEMA Frame Size
Phase
Rotation
RPM Range
Speeds
Standards
Voltage
Mounting
No. of Poles
Description
Price
Quantity
JARD Condenser Fan Motor
JARD Condenser Fan Motor
1/4HP 208-230V 1075RPM
3 WIRE CONDENSER FAN MTR
MARS 3 Wire Condenser Fan Motor
1/3HP 208-230V 1075RPM
3 WIRE CONDENSER FAN MTR
MARS 3 Wire Condenser Fan Motor
Condenser Fan motor
Condenser Fan Motor
Condenser Fan motor